ipt122

IPT122 2″ Indicating

Pressure Transmitters

Kategória: .

Termékleírás

IPT122 2 Inch Stainless Steel Indicating Pressure
Transmitter Specifications
Case Material 300 Series Stainless Steel, electropolished
Bezel and Lens Material One-piece polycarbonate, screw-on
Socket 316L stainless steel
Movement 300 Series Stainless Steel
Bourdon Tube 316L Stainless Steel
Proof Pressure 110%
Burst Pressure 400%
Connections Face-seal male, face-seal swivel male,
face-seal swivel female and 1/4″ NPT male
Dial White with black marking. “Use No Oil” is
red
Accuracy 1% of full scale
Helium Leak Check 4 x 10–9 Inboard Std. cc/sec
Cleaning Cleaned for oxygen service to ANSI B40.1
level IV specifications
Response Time Less than 200 milliseconds
Operating (ambient) 0° to 160°F (–18° to 71°C)
Compensating 20° to 135°F (–7° to 57°C)
Storage –20° to 175°F (–29° to 79°C)
Voltage In 11.5 to 30 VDC (12 VDC recommended)
Voltage Stability Filtered power supply with noise < 2mV
RMS, ripple < 6 mV P-P
Operating Current 40 mA maximum short circuit to ground,
8 mA continuous load, 10 mA maximum
intermitttent
Output Voltage
Type 1 0–5 VDC
Type 2 1–5 VDC
Type 3 1–5 VDC ground referenced
Type 4 4–20 mA sinking
Type 5 0–5 VDC or 1–5 VDC, or 4–20 mA
current sink
Type 6 1–5 VDC ground reference, 4–20 mA
sinking
Type 8 4–20 mA sourcing, 3 Pin Molex connector
with 10’ cable
Type 9 4–20 mA sourcing 6’ cab/w with tinned ends
Output Current 40 mA max. short circuit to ground. 10 mA
continous load.
Transmitter Leads 2 m [6′] cable, tinned ends, 0.23″ in
diameter
Pressure Ranges Available Vacuum to 4,000 PSI (276 bar). Metric also
available (See chart on the left)
Approximate Shipping
Weight 8.5 lbs. (0.39 kg)

Katalógus

GDE Hiba: Nem sikerült betölteni a profil beállításait